3206 Ringgold Road, Chattanooga, TN 37412 | 423.629.1235 | info@eastridgecarwash.com
Car Wash Bubbles

Multi-Stage Paint Correction/ 1992 Black Mercedes

We were recently asked if we could correct the black paint on this 1992 Mercedes without swirling the paint. The entire surface had severe etching in the clear coat, most notably on the horizontal panels such as the hood and the trunk lid where the etching was much deeper. We knew that this would be a very time consuming challenge because there would be a large amount of wet sanding involved which always requires additional steps in the buffing process as well in addition to having black paint. Black paint is usually on of our specialties, but this was going to be a serious test. After thoroughly hand washing the car, we clayed and prepped the paint. This is how the hood looked after washing and claying. The etches are clearly visible on the paint.We then measured the thickness of the paint to make sure that we would be able to wet sand without sanding through the clear coat and did a test run on a demo spot to determine the level of sanding that we felt was appropriate based on our f...


read more

Black 2001 Jaguar XJR (after)

After washing and claying the entire vehicle to exfoliate the paint to prevent further damage, we polished the paint with a three stage paint correcting polish and a D/A polsher (D/A is a "Dual-Action" polisher as opposed to a "high speed" or "rotary" buffer).The polish completely eliminated the small scratches rather than temporarily hiding them like a wax or swirl remover would. We want true results rather than temporary results. This took several hours to complete, but once the surface was smooth and blemish free, we applied two coats of a durable paint sealant that forms an invisible sheild over the surface. Once the sealant had time to bond to the paints, surface, we appilied to two coats of a premium paste wax for additional protection as well as delivering a look that is unparalleled. The marring was gone and we were left with a deep shine. We wanted to make the flakes in  the paint stand out to add stronger depth and clarity. The trunk lid was retored to its original brill...


read more

How to Prevent and Eliminate "Swirls"

Author: Administrator | Date: 12/27/2011 | Category: Exterior Maintenance | Comments: 0
Tags: AUTO CAR CHATTANOOGA CLAYBAR COMPOUND DETAILING EXOTIC PAINT POLISH SWIRLS TENNESSEE WAX

If you ever collected baseball cards and found a rare hologram of your favorite player, you were probably pretty excited about it. I know that I always was. However, I do not feel that same excitement when the paint on my favorite car looks like a hologram. These holograms or swirls can appear as a result from improper washing techniques as well as improper use of a rotary or high speed buffer. Improper washing will slowly form swirls because contaminants on the paint will be moved around during the washing process and will make small scratches that become more apparent over time. Improper use of a rotary tool could include using an over aggressive compound and/or buffing pad and not taking the necessary steps afterwards to eliminate the swirls caused during the process.   Prevention: Using claybar is the best way to prevent contanimants from building up on your vehicles' paint. Claying and waxing your paint in a few times a year will greatly reduce the negative side affect...


read more